On this page 7 sections
Sheets by material
Stainless Steel Sheets
- SS 201 Sheets
- SS 202 Sheets
- SS 301 Sheets
- SS 302 Sheets
- SS 304 Sheets
- SS 304L Sheets
- SS 304H Sheets
- SS 309 Sheets
- SS 309S Sheets
- SS 310 Sheets
- SS 310S Sheets
- SS 316 Sheets
- SS 316L Sheets
- SS 316Ti Sheets
- SS 317 Sheets
- SS 317L Sheets
- SS 321 Sheets
- SS 321H Sheets
- SS 347 Sheets
- SS 347H Sheets
- SS 409 Sheets
- SS 409M Sheets
- SS 410 Sheets
- SS 420 Sheets
- SS 430 Sheets
- SS 441 Sheets
- SS 446 Sheets
- SS 904L Sheets
- Duplex 2205 Sheets
- Super Duplex 2507 Sheets
- SS 253 MA Sheets
- SS 254 SMO Sheets
Nickel Alloys Sheets
- Inconel 600 Sheets
- Inconel 601 Sheets
- Inconel 625 Sheets
- Inconel 718 Sheets
- Incoloy 800 Sheets
- Incoloy 800H Sheets
- Incoloy 800HT Sheets
- Incoloy 825 Sheets
- Monel 400 Sheets
- Monel K-500 Sheets
- Hastelloy C22 Sheets
- Hastelloy C276 Sheets
- Nickel 200 Sheets
- Nickel 201 Sheets
Carbon Steel Sheets
Non-Ferrous Metals Sheets
How they are made
Hot-rolled coil is cold-rolled to final thickness, then annealed and pickled (2B/2D) or bright annealed (BA), temper-passed, and polished or textured as needed. Coils are then levelled and cut into sheets.
Sheets: how they are made, sized and tested
How it's madeHot-rolled coil is cold-rolled to final thickness, then annealed and pickled (2B/2D) or bright annealed (BA), temper-passed, and polished or textured as needed. Coils are then levelled and cut into sheets.
- Size range
- Thickness about 0.3 – 6 mm, standard sizes 1,000 × 2,000, 1,219 × 2,438 (4 × 8 ft), 1,250 × 2,500 and 1,500 × 3,000 mm; custom cut lengths
- Finish
- 2B, 2D, BA, No.4 (brushed), HL (hairline), No.8 (mirror), embossed, PVC or laser-film protected
- Ends
- Sheared or slit edges; laser-cut blanks on request
Testing & documents
- Chemical and mechanical tests
- Surface and finish inspection
- Thickness and flatness checks
- Hardness and bend tests as specified
- EN 10204 3.1 certificate; 3.2 with third-party inspection
Marking and packing
Marking: Grade, specification, heat number and size, printed on the sheet surface or protective film, plus a pallet label.
Packing: Wooden pallets with paper interleaving or PVC film, strapped and weather-protected.
Sheets: comparisons
Weight calculators
Estimate weights with our plate & sheet weight calculator.
Frequently asked questions
What is 2B finish?
A cold-rolled, annealed and pickled finish with a light skin-pass. It's smooth, moderately reflective and the most common stainless sheet finish.
What is the difference between No.4 and HL finish?
Both are brushed finishes. No.4 has short, uniform grain lines; HL (hairline) has long, continuous lines for a more decorative look.
Which materials are sheets available in?
Stainless Steel, Nickel Alloys, Carbon Steel, Non-Ferrous Metals: 58 grades in total, from stock or mill-sourced.
What sizes of sheets do you supply?
Thickness about 0.3 – 6 mm, standard sizes 1,000 × 2,000, 1,219 × 2,438 (4 × 8 ft), 1,250 × 2,500 and 1,500 × 3,000 mm; custom cut lengths.
How are sheets tested?
Chemical and mechanical tests; Surface and finish inspection; Thickness and flatness checks.