Offshore, decommissioning, carbon capture
Seawater and sour-service alloys, and bolting.
Export market · Europe · United Kingdom
Stainless and alloy pipe for the UK after the UK–India trade deal
In short: since 15 July 2026 the UK–India trade agreement removes UK tariffs on 99% of product lines, while new UK steel measures from 1 July 2026 run alongside it through quotas. Bright Tubes supplies stainless, duplex, nickel alloy and Cr-Mo pipe, fittings and flanges to UK fabricators, energy and process plants, with EN 10204 certificates.
Three rule sets
What changed for imported pipe in 2026
- 1 October 2024CE recognised indefinitely
Amendment regulations extended GB recognition of CE marking for many products, including pressure equipment under PER 2016.[1]
- 1 July 2026UK steel measures
Lower quotas and a 50% tariff on specified steel imports above quota.[4]
- 15 July 2026UK–India FTA in force
UK tariffs removed on 99% of lines; India's steel shipments covered by quota arrangements.[3][5]
Who buys
UK demand, by sector
North Sea specifications to check
NORSOK M-650 qualifies manufacturers of special materials such as duplex, super duplex, 6Mo austenitic and nickel alloys.
NORSOK M-630 material data sheets set the chemistry, testing and certification for those materials.
If your order cites them, we source only from mills holding the relevant M-650 qualification and say so on the quotation.
Offshore
North Sea orders often cite NORSOK
Norwegian NORSOK standards are widely used on UK continental shelf projects as well. Super duplex and 6Mo bought for offshore seawater, firewater and produced-water systems typically need a NORSOK-qualified mill and impact testing at low temperature. Compare 2205 vs 2507.
Industries served
Sectors we supply in UK
From enquiry to quay
How an order to UK runs
- 01 EnquiryGrade, specification, size, quantity
- 02 ReviewChecked against your standard
- 03 InspectPMI, dimensions, TPI if required
- 04 CertifyEN 10204 3.1 / 3.2, heat traceable
- 05 ShipPacked and documented for Felixstowe
UK buyer questions
Answers for UK buyers
Does pipe for UK pressure systems need UKCA marking?
Pressure equipment and assemblies above 0.5 bar fall under the Pressure Equipment (Safety) Regulations 2016.[1][2] The UK has extended recognition of CE marking indefinitely for many products, alongside UKCA.[1] Pipe, fittings and flanges are normally supplied as materials with EN 10204 certificates; marking of the finished equipment is the manufacturer's responsibility.
When did the UK–India trade deal start?
How do the UK's 2026 steel measures affect Indian pipe?
From 1 July 2026 the UK cut steel import quotas and set a 50% tariff on specified steel above quota. India's concerns were addressed through a country-specific quota, residual quota and an authorised-use scheme, reported to cover about 85% of its steel shipments.[4][5] Confirm the current position for your commodity code with your broker.
Which certificates do UK buyers expect?
EN 10204 3.1 as standard, 3.2 with a notified body or third-party inspector for critical service, and PMI for alloy material. See reading a 3.1 certificate.
Which UK ports do you ship to?
Felixstowe and London Gateway for the south-east, Southampton, Liverpool and Teesport for the north, and Aberdeen or Grangemouth for Scottish energy work.
Sources
References
Trade rules and project schedules change. Confirm current requirements with your customs broker or project authority before shipment.
- GOV.UK: Pressure Equipment (Safety) Regulations 2016, Great Britain guidance
- legislation.gov.uk: The Pressure Equipment (Safety) Regulations 2016
- UK–India Free Trade Agreement to enter into force on 15 July 2026
- UK–India trade deal to start in July after reassurance on steel
- India–UK trade deal: July 15 implementation and steel quota arrangements
Buying for a UK project?
Send your list with the commodity codes. We quote with certificate type and trade-deal origin noted on each line.