On this page 6 sections
What ASTM B363 covers
Standard at a glance
- Standard
- ASTM B363
- Issued by
- ASTM
- Product form
- Fittings
- Grades on site
- 5
Covers butt-weld fittings (elbows, tees, reducers, caps) in titanium grades WPT1, WPT2, WPT3 and others, made from pipe, plate or bar to ASME B16.9 dimensions.
Key requirements
- Starting material to the matching titanium product specification
- Annealed after forming
- Dimensions per ASME B16.9 unless otherwise agreed
- Marking with WPT grade symbol
Summary for procurement guidance. Refer to the current edition of the standard for full requirements.
Grades supplied to ASTM B363
Ordering to ASTM B363
- State "ASTM B363" and the edition if your project requires it
- Grade / designation and product dimensions
- Supplementary requirements (tests, heat treatment, certification)
- Certificate type: EN 10204 3.1 or 3.2
Frequently asked questions
What does ASTM B363 cover?
Covers butt-weld fittings (elbows, tees, reducers, caps) in titanium grades WPT1, WPT2, WPT3 and others, made from pipe, plate or bar to ASME B16.9 dimensions.
Which grades are covered by ASTM B363?
On this site: Titanium Grade 1, Titanium Grade 2, Titanium Grade 3, Titanium Grade 4, Titanium Grade 5.
Do you supply material certified to ASTM B363?
Yes. Material is supplied to ASTM B363 with EN 10204 3.1 certificates (3.2 on request), where the mill certifies to it.
Is ASME SAB363 the same as ASTM B363?
ASME adopts many ASTM material specifications into Section II with an "S" prefix (for example SA-363). The adopted text is identical or includes stated modifications, and dual-certified material meets both.