Non-Ferrous Metals · Plates · ASTM B265 / ASME SB265

Titanium Grade 2 Plates

In short: Titanium Grade 2 plate to ASTM B265 is used for heat-exchanger tube sheets, chlorine-service vessels, anodes and seawater equipment.

Calculated values for estimating; actual weights vary within tolerances.

Why this combination

Why Titanium Grade 2 in plates

Most widely used CP titaniumImmune to seawater and wet chlorine corrosionGood weldability and formabilityAbout 57% of the density of steel

Tube sheets for titanium-tubed exchangers and chlor-alkali equipment are made from Grade 2 plate or titanium-clad steel.

Welding requires inert shielding to avoid contamination.

Specification

Thickness about 3 – 150 mm (and heavier on request), widths 1,000 – 3,000 mm, lengths 2,000 – 12,000 mm; cut-to-size and profile-cut parts

Titanium Grade 2 plates: ASTM B265 / ASME SB265

Sizes and weights

Other sizes on request. For general plates information, such as manufacturing routes and end finishes, see the plates guide.

Titanium Grade 2 plate weights at 4.51 g/cm³
Thickness mm	kg/m²	1,500 × 6,000 plate, kg	2,000 × 6,000 plate, kg
3	13.5	122	162
5	22.5	203	271
6	27.1	244	325
8	36.1	325	433
10	45.1	406	541
12	54.1	487	649
16	72.2	649	866
20	90.2	812	1,082
25	112.8	1,015	1,353
30	135.3	1,218	1,624
40	180.4	1,624	2,165
50	225.5	2,030	2,706
65	293.2	2,638	3,518
80	360.8	3,247	4,330
100	451.0	4,059	5,412

Chemistry

Limits per ASTM B265; other product forms and specifications differ slightly. Your order's specification and edition govern.

Questions

Is titanium plate used in chlor-alkali plants?

Yes, it resists wet chlorine.

Does titanium need special welding?

Yes, full inert-gas shielding of the weld and back side.

From enquiry to dispatch

Send size, quantity, specification and destination. We reply with availability, certificates and delivery.