On this page 4 sections
What ASTM A992 covers
Standard at a glance
- Standard
- ASTM A992 / A992M
- Issued by
- ASTM
- Product form
- Beams
- Grades on site
- —
The standard specification for wide-flange (W) structural shapes in buildings and bridges, with 345 MPa minimum yield, a maximum yield-to-tensile ratio and a carbon-equivalent limit for weldability.
Key requirements
- Yield 345–450 MPa with a yield-to-tensile ratio of 0.85 max
- Carbon equivalent limit for weldability
- Tension testing per heat
- Dimensional tolerances per ASTM A6
Summary for procurement guidance. Refer to the current edition of the standard for full requirements.
Ordering to ASTM A992
- State "ASTM A992" and the edition if your project requires it
- Grade / designation and product dimensions
- Supplementary requirements (tests, heat treatment, certification)
- Certificate type: EN 10204 3.1 or 3.2
Frequently asked questions
What does ASTM A992 cover?
The standard specification for wide-flange (W) structural shapes in buildings and bridges, with 345 MPa minimum yield, a maximum yield-to-tensile ratio and a carbon-equivalent limit for weldability.
Which grades are covered by ASTM A992?
It is a dimensional or documentation standard that applies across grades.
Do you supply material certified to ASTM A992?
Yes. Material is supplied to ASTM A992 with EN 10204 3.1 certificates (3.2 on request), where the mill certifies to it.
Is ASME SAA992 the same as ASTM A992?
ASME adopts many ASTM material specifications into Section II with an "S" prefix (for example SA-992). The adopted text is identical or includes stated modifications, and dual-certified material meets both.