Non-Ferrous Metals Sheets
Sheets are thin flat products, typically from about 0.3 mm to 6 mm thick, usually cold-rolled for tight thickness tolerance and a smooth finish. They're used for fabrication, cladding, panels, enclosures, kitchens, appliances and process equipment.
Choose a grade below for specifications, composition, sizes and weight charts.
Non-Ferrous Metals sheets by grade
| Grade | Specification | Key characteristic | Typical use |
|---|---|---|---|
| Titanium Grade 1 Sheets | ASTM B265 | Lowest-strength, most formable CP titanium | Plate heat-exchanger plates |
| Titanium Grade 2 Sheets | ASTM B265 | Most widely used CP titanium | Condenser and heat-exchanger tubes |
| Titanium Grade 3 Sheets | ASTM B265 | Higher strength than Grade 2 | Pressure vessels and heat-exchanger shells |
| Titanium Grade 4 Sheets | ASTM B265 | Highest-strength CP titanium | Airframe and aero-engine components |
| Titanium Grade 5 Sheets | ASTM B265 | Ti-6Al-4V alpha-beta alloy | Aerospace structures and engine parts |
| Cupro-Nickel 90/10 Sheets | ASTM B402 | Standard for seawater piping | Ship and offshore seawater piping |
| Cupro-Nickel 70/30 Sheets | ASTM B402 | About 30% nickel | Power-station condenser tubes |
| Copper Sheets | ASTM B152 | Highest conductivity of common metals | Heat-exchanger and condenser tubes |
| Brass Sheets | ASTM B36 | Admiralty brass for condenser tubes | Condenser and heat-exchanger tubes |
| Aluminium Sheets | ASTM B209 | About ⅓ of the density of steel | Marine hulls and superstructures (5083) |
How non-ferrous metals sheets are made, sized and tested
How it's madeHot-rolled coil is cold-rolled to final thickness, then annealed and pickled (2B/2D) or bright annealed (BA), temper-passed, and polished or textured as needed. Coils are then levelled and cut into sheets.
- Size range
- Thickness about 0.3 – 6 mm, standard sizes 1,000 × 2,000, 1,219 × 2,438 (4 × 8 ft), 1,250 × 2,500 and 1,500 × 3,000 mm; custom cut lengths
- Finish
- 2B, 2D, BA, No.4 (brushed), HL (hairline), No.8 (mirror), embossed, PVC or laser-film protected
- Ends
- Sheared or slit edges; laser-cut blanks on request
Testing & documents
- Chemical and mechanical tests
- Surface and finish inspection
- Thickness and flatness checks
- Hardness and bend tests as specified
- EN 10204 3.1 certificate; 3.2 with third-party inspection
Frequently asked questions
What is 2B finish?
A cold-rolled, annealed and pickled finish with a light skin-pass. It's smooth, moderately reflective and the most common stainless sheet finish.
What is the difference between No.4 and HL finish?
Both are brushed finishes. No.4 has short, uniform grain lines; HL (hairline) has long, continuous lines for a more decorative look.
Which non-ferrous metals grades are available as sheets?
Titanium Grade 1, Titanium Grade 2, Titanium Grade 3, Titanium Grade 4, Titanium Grade 5, Cupro-Nickel 90/10, Cupro-Nickel 70/30, Copper, Brass, Aluminium.
Which specifications cover non-ferrous metals sheets?
ASTM B265, ASTM B402, ASTM B152, ASTM B36, ASTM B209, depending on grade.
Need non-ferrous metals sheets?
Send grade, size, quantity and destination.