Oil & GasUpstream and midstream oil and gas production puts materials through high pressures, sour (H₂S) fluids, chlorides, CO₂ and seawater, often offshore where replacement is costly.Petrochemical & RefiningRefineries and petrochemical complexes combine high temperatures, hydrogen, sulphur compounds and corrosive process streams.Chemical ProcessingChemical plants handle acids, alkalis, chlorides, solvents and oxidisers at varying temperatures and concentrations, so no single material fits all.Power GenerationThermal power plants run steam at high temperature and pressure for decades, so creep strength, oxidation resistance and weld integrity govern design.NuclearNuclear power and fuel-cycle facilities use austenitic stainless steels and nickel alloys for their corrosion resistance, toughness and stability under long service.Pharmaceutical & BiotechPharmaceutical and biotech plants need cleanable, corrosion-resistant materials with controlled surface finish and full traceability.Food & Beverage ProcessingFood, dairy and beverage plants rely on stainless steel for hygiene, cleanability and resistance to food acids, brines and cleaning chemicals.Marine & OffshoreMarine and offshore environments combine seawater immersion, splash zones and salt-laden air.ShipbuildingShipyards need approved structural steels for hulls, plus corrosion-resistant piping for seawater, ballast, firefighting, fuel and hydraulic systems.AerospaceAerospace structures and engines demand high strength-to-weight, fatigue resistance and high-temperature capability, usually supplied to AMS or customer specifications with full traceability.Automotive & TransportAutomotive and transport manufacturers use ferritic stainless steels for exhaust systems, austenitic and 200-series grades for trim and structural parts, high-strength steels and aluminium for weight reduction, and precision tubes for hydraulics and fuel lines..Construction & ArchitectureBuildings and architecture use structural carbon steel for frames, and stainless steel for facades, railings, canopies, fixings and interiors where durability and appearance matter.InfrastructureBridges, metro and railway systems, pipelines, ports and water networks need durable structural steels, line pipe, rails and corrosion-resistant components with long design lives and certified traceability..Heavy EngineeringHeavy engineering covers cranes, mining and earthmoving machines, presses, steel-plant equipment and large fabrications.Process Equipment ManufacturingOEMs building reactors, columns, agitators, filters, dryers and skids buy plate, pipe, tube, fittings and flanges in matching grades and specifications, often cut to size, with complete documentation packages for their end customers..Heat Exchanger ManufacturingHeat-exchanger fabricators need tubes, tubesheets, shells, channels and flanges designed to TEMA and ASME VIII, with tube materials matched to the cooling medium and process fluid.Boiler ManufacturingBoiler makers use carbon steel tubes and pipes for waterwalls and economisers, Cr-Mo alloy tubes and headers for superheaters, and austenitic H grades for the hottest tubes, with IBR certification on Indian projects and ASME Section I elsewhere..Pressure Vessel FabricationPressure-vessel fabricators work to ASME VIII, EN 13445 and other codes, using certified plate for shells and heads, forgings for nozzles and flanges, and pipe for nozzles.Water & Wastewater TreatmentWater and wastewater plants need materials that resist chlorinated water, sludge and treatment chemicals over decades.DesalinationDesalination plants (reverse osmosis and thermal MSF/MED) handle seawater and concentrated brine at high pressure or high temperature, one of the most corrosive environments in industry.FertilizerFertiliser plants (ammonia, urea, nitric acid, phosphoric acid and complex fertilisers) combine high-pressure synthesis, hot ammonia and corrosive acids.Mining & MineralsMining and mineral processing wear equipment out through abrasion and impact, while hydrometallurgy adds acidic, chloride-bearing slurries.CementCement plants combine abrasive raw materials, clinker and fuels with kiln temperatures above 1,400 °C.SugarSugar mills and distilleries face wet abrasion from cane and bagasse, acidic juices and high-temperature evaporation.Engineering & FabricationFabricators and engineering contractors need a dependable mix of plate, sheet, pipe, sections, bar and fasteners across carbon, stainless and specialty grades, often cut to size, with consistent documentation for their end customers..
Applications
Process PipingProcess piping carries fluids between equipment in refineries, chemical, pharmaceutical and utility plants, designed to ASME B31.3 or similar codes.Pressure VesselsPressure vessels (separators, drums, columns, reactors, receivers) are built from plate, forgings and pipe to ASME VIII, EN 13445 or national codes.Heat ExchangersShell-and-tube heat exchangers transfer heat between process fluids and cooling or heating media.Boilers & SuperheatersBoiler pressure parts (waterwalls, economisers, superheaters, reheaters and headers) see high temperatures and pressures, with creep and oxidation as the main design limits..CondensersSurface condensers in power plants and process units condense exhaust steam using cooling water, which is often seawater or brackish water.ReactorsChemical and hydroprocessing reactors combine pressure, temperature and corrosive or hydrogen-rich environments.Storage TanksAtmospheric and low-pressure storage tanks (API 650 and similar) store crude, products, chemicals, water and food liquids.Oil & Gas PipelinesTransmission, gathering and flow lines carry oil, gas and water over long distances at high pressure.Power Plant PipingPower-plant piping to ASME B31.1 and IBR includes main steam, hot and cold reheat, feedwater and auxiliary systems, each with distinct temperature, pressure and corrosion requirements..Structural FabricationStructural fabrication covers buildings, sheds, pipe racks, platforms, towers and equipment supports, using beams, channels, angles, plates and gratings in structural grades..Industrial MachineryMachinery builders use bars for shafts and components, plates for frames, wear plates for liners, and fasteners throughout, with grades chosen for strength, wear and corrosion..Marine EquipmentMarine equipment such as pumps, valves, shafts, deck machinery and seawater systems needs materials matched to immersion, splash or atmospheric exposure..Pharmaceutical EquipmentPharmaceutical equipment such as reactors, vessels, WFI and clean-steam systems, and process tubing needs cleanable, traceable, corrosion-resistant materials with controlled surface finish..Food Processing EquipmentFood and beverage equipment such as tanks, pasteurisers, conveyors, kitchens and filling lines uses stainless steel for hygiene, and cleanability..Chemical Processing EquipmentColumns, scrubbers, evaporators, agitators and piping in chemical plants must resist the specific acids, alkalis and chlorides they handle, which calls for a material ladder from SS 316L to nickel alloys..Petrochemical EquipmentFurnaces, crackers, reformers, heaters, exchangers and reactors in petrochemical plants face high temperatures, carburisation and hydrogen, which calls for Cr-Mo steels, stabilised stainless steels and Fe-Ni-Cr alloys..
Frequently asked questions
Which industries do you supply?
Oil & gas, refining and petrochemicals, chemicals, power, nuclear, pharmaceuticals, food, marine, shipbuilding, aerospace, construction, infrastructure, mining, cement, sugar, water and desalination, fertilisers, and equipment manufacturers.
Can you support project documentation?
Yes: MTCs, inspection records, packing lists and destination documents.
Do you supply EPC contractors?
Yes. We supply EPC contractors, fabricators, OEMs and plant owners.
Can't find what you need?
Send your requirement and we'll source it for you.