Non-Ferrous Metals Coils
Coils are continuous rolled strip wound into rolls, supplied hot-rolled or cold-rolled in mill widths or slit narrower. They feed tube mills, stamping lines, roll formers and service centres, and are the most economical form for high-volume flat-product users.
Choose a grade below for specifications, composition, sizes and weight charts.
Non-Ferrous Metals coils by grade
| Grade | Specification | Key characteristic | Typical use |
|---|---|---|---|
| Titanium Grade 2 Coils | ASTM B265 | Most widely used CP titanium | Condenser and heat-exchanger tubes |
| Copper Coils | ASTM B152 | Highest conductivity of common metals | Heat-exchanger and condenser tubes |
| Aluminium Coils | ASTM B209 | About ⅓ of the density of steel | Marine hulls and superstructures (5083) |
How non-ferrous metals coils are made, sized and tested
How it's madeHot-rolled coil (HRC) comes from the hot-strip mill. Cold-rolled coil (CRC) is further reduced on a cold mill, then annealed and pickled or bright annealed, and skin-passed. Slitting lines cut master coils into narrow strips to the width you order.
- Size range
- Thickness about 0.3 – 12 mm; widths from narrow slit strip (about 10 mm) to 1,250 / 1,500 / 2,000 mm; coil ID 508 / 610 mm; coil weights to order
- Finish
- No.1 (hot-rolled, annealed, pickled), 2B, 2D, BA, No.4 for stainless; HR black, pickled & oiled, CR for carbon steel
- Ends
- Mill edge or slit edge
Testing & documents
- Chemical and mechanical tests
- Thickness profile and surface inspection
- Hardness and bend tests
- EN 10204 3.1 certificate; 3.2 with third-party inspection
Frequently asked questions
What is the difference between HR and CR coil?
Hot-rolled coil is rolled at high temperature, with a scaled or pickled surface and wider tolerances. Cold-rolled coil is reduced at room temperature for tighter thickness, a smoother surface and better flatness.
Which non-ferrous metals grades are available as coils?
Titanium Grade 2, Copper, Aluminium.
Which specifications cover non-ferrous metals coils?
ASTM B265, ASTM B152, ASTM B209, depending on grade.
Need non-ferrous metals coils?
Send grade, size, quantity and destination.